BDWVN - 6999-0001, EPOXY PATCH KIT PART-A, HARDENER

  • MSDS: BDWVN
  • Manufacturer: PACE INC
  • Product Name: 6999-0001, EPOXY PATCH KIT PART-A, HARDENER
  • National Stock Number: 4920-00-333-3045
Product Identification

Product ID:6999-0001, EPOXY PATCH KIT PART-A, HARDENER
MSDS Date:09/01/1986
FSC:4920
NIIN:00-333-3045
Kit Part:Y
MSDS Number: BDWVN

Responsible Party
PACE INC.
9893 BREWERS COURT
LAUREL, MD 20707-1905
US

Emergency Phone: (301) 490-9860

Cage: KO451

Contractor
PACE INC.
LAUREL, MD 20707 US

Telephone: 301-490-9860

Cage: KO451

Ingredients

UNIDENTIFIED COMPONENTS

Fraction By Weight: 100%

Hazards

Effects of Overexposure:NONE NOTED BY MFR. LOW TOXICITY & LOW HAZARD TO
HEALTH.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:>210F/99C (OC)
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:ELIM IGN SOURCES.USE APPROPRIATE EQUIP.SCRAPE
UP & TRANSFER TO METAL CONTAINERS.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
CONTAINERS TIGHTLY CLOSED

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
MSDS FROM PACE INC.DATE:9/86; EPOXY PATCH KIT IS A PART OF MATERIAL
REPAIR KIT P/N 6993-007; EPOXY PATCH KIT IS ALSO A 2 PART KIT; THIS
ENTRY DESCRIBES HARDENER OF EPOXY KIT.KEY1:N1.

Chemical Properties

HCC:F2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACID
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:NOT KNOWN

Disposal

Waste Disposal Methods:MFR RECOMMENDS TO BURY IN SANITARY
LANDFILL.COMPLY WITH ALL APPLICABLE FED,STATE,LOCAL REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.